Fullriver Batteries | Sydney & Western Sydney
Find a Fullriver battery for your application
Compare Fullriver batteries with help from Battery Brands Warehouse in Sydney and Western Sydney. Our catalogue includes AGM deep-cycle options and a high-cranking option, with different sizes and specifications to check against your equipment.
Two local stores · Battery-photo enquiries · Specification and fitment advice
Choose by application, not just battery size
Start with the specification required by your vehicle or equipment. A battery designed for repeated discharge and recharge is not automatically interchangeable with a battery chosen for engine starting.
Confirm voltage, technology, capacity, dimensions, terminals and hold-down requirements. For battery banks, check the complete system and charger as well as the individual battery.
Fullriver deep-cycle options in our catalogue
The Fullriver range listed in our catalogue includes compact 12V batteries and larger deep-cycle models. Examples include DC7-12, DC12-12, DC20-12, DC26-12A and DC26-12B, along with DC250-6, DC335-6, DC400-6 and DC180-8.
These references are a starting point for comparison, not a guarantee of suitability or current stock. Similar names can identify different terminals or case arrangements. Confirm the exact model before ordering.
Browse Fullriver product listings and specifications.
High-cranking applications
Our catalogue also lists the Fullriver HC44 high-cranking battery. If you need starting performance rather than a deep-cycle replacement, check the vehicle's requirements and the exact product specification before choosing.
Do not treat a cross-reference or similar case size as a complete fitment check. Confirm terminal position, cable clearance, hold-down and charging compatibility.
What to check before buying
| Selection check | Information to provide |
|---|---|
| Application | Equipment make and model, and whether the battery starts an engine or powers equipment. |
| Electrical specification | Required voltage, technology, capacity and starting rating where relevant. |
| Physical fit | Case dimensions, terminal type and position, cable reach and mounting arrangement. |
| Battery bank and charger | Number of batteries, bank voltage, configuration and charger model. |
Information is a guide only — visual inspection is advised.
Replacing an existing battery?
Send a clear photo of the battery label and terminals, plus your equipment make and model. For a bank replacement, include the number of batteries fitted and a charger-label photo.
Planning a battery-bank replacement?
Have the complete bank assessed before deciding what to replace. Follow the equipment and battery manufacturer's guidance on matching batteries and approved configurations rather than mixing models or capacities on guesswork.
For mobility equipment, golf carts or other specialist applications, confirm equipment approval and charger compatibility before changing battery technology or capacity. A higher Ah rating does not automatically make a battery a suitable upgrade.
Charging and care
Use charging settings that meet the exact battery manufacturer's requirements, including voltage and permitted current. Do not assume all AGM batteries require identical settings.
AGM batteries do not normally require water topping up, but still need correct installation, charging and periodic inspection. Follow the manufacturer's requirements for ventilation and mounting position.
Investigate repeated discharge or reduced performance rather than relying on repeated charging alone. Do not charge a damaged, swollen, leaking or frozen battery.
Fullriver battery advice in Sydney and Western Sydney
Contact our Wetherill Park or Regents Park team with your required model, quantity and application. Call to check current stock or hold your items before visiting. For complete banks or specialist fitments, confirm availability and any fitting arrangements first.
Wetherill Park, open 7 days
Shop 11D, 1183 The Horsley Drive, Wetherill Park NSW 2164, Greenway Plaza
(02) 9157 1087
Monday–Saturday: 8:30 am–5:00 pm
Sunday: 9:00 am–4:00 pm
Regents Park, open 6 days
Unit 1/40 Carlingford Street, Regents Park NSW 2143
(02) 9157 1088
Monday–Friday: 8:00 am–5:30 pm
Saturday: 8:30 am–5:30 pm
Sunday: Closed
Frequently asked questions
How do I choose the correct Fullriver model?
Match the equipment's required specification and physical installation. Send the existing battery reference, equipment details and photos for help comparing options.
Can I substitute DC26-12A for DC26-12B?
Do not assume similar references are interchangeable. Check dimensions, terminals and the exact product specifications against your installation.
Are all the listed models available immediately?
Call with the model and quantity required so we can confirm current availability before you travel or plan a replacement.
Can I use an existing charger?
Only if its charging profile and current output meet the replacement battery or bank's requirements. Send the charger details if you need help checking.
Find your Fullriver replacement
Shop Fullriver batteries or send your battery details for advice.
Call Wetherill Park: (02) 9157 1087 or Regents Park: (02) 9157 1088 to confirm stock.
